The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares V7 Sport 750S S3 850T Service Items

Sort by Title

Sort by Price

Page 2 of 4

1 2 3 4

Oil Filter UFI 2314900

SIA14530 Fits 125 2C, 250 TS, S3, 850/1000 ALL Models, Daytona 1000

Dimensions:
For 16mm threaded spigot

Cartridge oil filter UFI 23 149 00

Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.

You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket). Please note that Daytona RS and T5 Polizia use filter SIA15300

part in stock More than 5 in stock

14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Crush Washer

SIA10900 Universal Part

Dimensions:
14mm outer diameter x 10.4mm inner diameter x 1mm

M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...

Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers

part in stock More than 5 in stock

10528900 GU10528900 10 52 89 00
1052 8900 1052.8900 10.52.89.00

£0.50

INC VAT

£0.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Spark Plug NGK BP6ES

SIA38145C Fits 1100 Sport Carb, Strada 1000, Cali 3, Spada 3 (Motoplat), 850T, SP II, S3, Convert, G5, S3, T3, T4, 850 GT, 1000 SP, Cali 2, Mille GT, V7 Special (1969-1971), Nuovo Falcone

NGK BP6ES Spark plug

See SIA04055 for compatible high performance Iridium spark plug. See TOA00014 for spark plug spanner

part in stock More than 5 in stock

BP6ES

£3.30

INC VAT

£2.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Spark Plug NGK BP7ES

SIA38145D Fits Cali 3 (PHM 40 carbs), Le Mans 1000, Quota, V35 II, V35 3, V35 TT, V35 NTX, Imola, V35 Florida, V65 Florida, V50 I, V50 II, V50 3, Monza, V50C, V65, V65 SP, V65 TT, Monza, V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3

NGK BP7ES spark plug

See SIA04055 for compatible high performance Iridium spark plug. See TOA00014 for spark plug spanner

part in stock More than 5 in stock

£3.50

INC VAT

£2.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Bike 20W-50 Mineral Engine Oil Millers Classic Pistoneeze Professional 1L

OIA34196 Fits V7 700, V7 Special, 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models, Quota 1100, Cali 1100 (1994-1997), V35 ALL, V50 ALL, V65 ALL, V75, Nevada ALL (1991-2004)

1 Litre of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve twins, it is similar to Castrol GTX 20/50 (which is no longer available). Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.

Features & Benefits:

Incorporates modern additive technology with period viscometrics to provide the optimum lubrication characteristics
Suitable for higher mileage applications where oil consumption is a problem
Meets up-to-date specifications along with meeting period performance requirements
Specific gravity at 15C: 0.833
Kinematic viscosity at 100C: 18.5cSt
Kinematic viscosity at 40C: 156.8cSt
Viscosity index: 133

Quantities required:
- 850/1000 ALL Models, Cali 1100, Quotas - engine: 3l
- V35, V50, V65, V75 - engine: 2l
See ENA41653 for a oil drain kit for your oil change

Please note this oil CANNOT be posted outside of the UK mainland area.
More than 5 in stock
Also fits Triumph Bonneville T100
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Condenser Marelli

SIA14786 Fits V7 Sport, 750S, S3, 850T, G5, Convert, 1000 SP, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T5, Cali 2, Cali 3

Dimensions:
body measures 30mm x 18mm, lead measures 140mm

Marelli condenser with cable and mount bracket

2 required

part in stock More than 5 in stock

14715433 GU14715433 14 71 54 33
1471 5433 1471.5433 14.71.54.33

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Sump Gasket

ENA12036 Fits V7 700, V7 Special (1969-1971), 850 GT, 850 GT Cali, V7 Sport, 750S

Dimensions:
255mm x 235mm

Sump gasket for models without oil filter

Two required if you have a sump extension fitted

part in stock More than 5 in stock

12003600 GU12003600 12 00 36 00
1200 3600 1200.3600 12.00.36.00

£3.80

INC VAT

£3.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Breather Pipe

ENA27980 Universal Part

Dimensions:
1000mm x 16mm x 9mm

Single 100cm length of pipe used for oil return and breather applications depending on model. Can be used as gearbox breather on Tonti 5 speed gearboxes

Use hose clip FUA00004

part in stock More than 5 in stock

823956080

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter Gauze Gasket

ENA12200 Fits V7 700, 850 GT, V7 Special (1969-1971), V7 Sport

Dimensions:
L 64mm W 41mm

Gasket for mesh filter

part in stock 5 in stock

12153200 GU12153200 12 15 32 00
1215 3200 1215.3200 12.15.32.00

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Stahlbus Oil Drain Valve

ENA41653 Fits V35 I, V35 II, V35C, Imola ALL, V50 ALL, V65, V75, V7 Sport, 750S, S3, 850/1000 ALL Models, Nevada 750, Cali 1100, Cali EV, Cali Stone, Cali Jackal, Breva 750, V7 Cafe, V7 Classic, 750 Targa, Strada 750, 750 SP

Dimensions:
M20 x 1.5 sump plug

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

Valve body, CNC precision turned part made of high quality steel
Copper crush washer
Hose connector, CNC precision turned part made of high quality steel
High quality hose 40cm long
Protection cover made of aluminum, anodized
Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

part in stock 5 in stock

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 4

1 2 3 4